расширенный поиск

Книга по требованию: The Hitchcock Lectures of the University of California, 1918 (Classic Reprint)

Товар № 11455595
Вес: 0.12 кг.
Год издания: 2015
Страниц: 64 Переплет: мягкая обложка
Товар отсутствует
Узнать о поступлении

Excerpt from The Hitchcock Lectures of the University of California, 1918

While some of the employees appear to have felt uneasy with regard to this buckling, it was apparently considered by those in charge to be insignificant and not a cause for anxiety. On August 28th a conference of the chief engineers and others in authority was held, and it was decided to place the situation before the consulting engineer in New York. A messenger went to New York for this purpose, and the consulting engineer, after conference, telegraphed Phoenixville, where the bridge was being fabricated, and sent his representative there for consultation with the officers of the bridge company. By the time he arrived at Phoenixville the bridge had collapsed. Eighty-five men went down with the bridge, and of these only eleven were saved.

No such mass of steel work had ever collapsed in the history of bridge building. Some 17,000 tons of steel formed one tangled mass of debris, extending from the anchor pier over the central pier down into the main current of the river.

A study of engineering failures is more enlightening than a study of engineering successes. The lecture discussed the causes of the disaster, and drew the lessons which it taught.

The material and workmanship of the bridge was considered to have been excellent. The disaster was not attributed to any flaw in material or defect in manufacture. It was due to the failure of the compression member and the buckling which had been noticed. This compression member had been designed without taking due account of the actual weight of the structure, the stresses in it were allowed to be too high, and the design was extremely faulty. The lattice bars connecting the parts of the member were much smaller in strength, in proportion to the size of the piece, than those used in ordinary design. These lattice bars had hitherto been designed in a purely empirical manner, although it is possible to apply to them some principles of mechanics. The lecturer, after the failure of the bridge and after obtaining details of the structure, had computed the strength of these columns and had found that failure should have taken place almost precisely when it did.

Facts and figures were given with reference to the details and the causes of the failure, which it is not necessary to discuss further in this abstract.

About the Publisher

Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com

This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Эта книга будет изготовлена в соответствии с Вашим заказом по технологии Print-on-Demand компанией ООО «Книга по Требованию». Print-on-Demand - это технология печати книг по Вашему заказу на цифровом типографском оборудовании. Книга, произведенная по технологии Print-on-Demand (POD) представляет собой классическую печатную книгу с соблюдением всех стандартов качества, от офсетной бумаги и плотного картона до качественного клея, используемого при изготовлении. Черно-белая текстовая или полноцветная иллюстрированная книга (в зависимости от исходного файла, подготовленного к печати) может быть изготовлена в разных вариантах: - в мягкой обложке (Клеевое Бесшвейное Скрепление); - скрепление скобой (для книг с небольшим количеством страниц); - в твердом переплете с клееным текстовым блоком; Материалы, используемые при производстве книги: - бумага текстового блока - офсетная (белая или кремовая) 80 г/м2 - мягкая обложка - бумага мелованная 250 г/м2; - ламинация обложки - матовая или глянцевая; - твердый переплет - картон 2 мм, каптал, белые форзацы, прямой корешок - сверхпрочный полимерный клей; - каждая книга упакована в термопленку. Каждый заказ обрабатывается в индивидуальном порядке: каждой книге, напечатанной по технологии Print-on-Demand, присваивается уникальный номер.

Читать далее