расширенный поиск

Книга по требованию: Elements Of Machine Design

Товар № 10892862
Вес: 0.65 кг.
Год издания: 2008
Страниц: 476 Переплет: мягкая обложка
Товар отсутствует
Узнать о поступлении

Elements of MACHINE DESIGN by DEXTER KIMBALL AND JOHN BARR. Originally published in 1909. Preface: THIS book presupposes a knowledge of Mechanism and Mechanics of Engineering. With the mechanism determined, the remainder of the work of designing a machine consists of two distinct parts: a) Consideration of the energy changes in the machine, and the maximum forces resulting therefrom. b) Proportioning the various parts to withstand these forces. A thorough understanding of these gencraI principles is essential to successful design. A very brief discussion of typical energy and force problems is given in Chapter 11. The general principles of lubrication and efficiency are discussed in Chapter IV. Both of these are of prime importance to the engineer and while the discussion is necessarily brief it is believed that the fundamental principles are fully covered. The remainder of the book is devoted to the discussion of some of the more important machine details, with a view of showing how the theoretical considerations and equations discussed in the first part of the work are applied and modified in practice. The treatise is, in no sense, a hand-book, neither is it a manual for the drafting room, but is a discussion of the fundamental principles of design, and only such practical data have been collected as are needed to verify or modify logical theory. Many of the earliest books, particularly those dating back to the 1900s and before, are now extremely scarce and increasingly expensive. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.

Эта книга будет изготовлена в соответствии с Вашим заказом по технологии Print-on-Demand компанией ООО «Книга по Требованию». Print-on-Demand - это технология печати книг по Вашему заказу на цифровом типографском оборудовании. Книга, произведенная по технологии Print-on-Demand (POD) представляет собой классическую печатную книгу с соблюдением всех стандартов качества, от офсетной бумаги и плотного картона до качественного клея, используемого при изготовлении. Черно-белая текстовая или полноцветная иллюстрированная книга (в зависимости от исходного файла, подготовленного к печати) может быть изготовлена в разных вариантах: - в мягкой обложке (Клеевое Бесшвейное Скрепление); - скрепление скобой (для книг с небольшим количеством страниц); - в твердом переплете с клееным текстовым блоком; Материалы, используемые при производстве книги: - бумага текстового блока - офсетная (белая или кремовая) 80 г/м2 - мягкая обложка - бумага мелованная 250 г/м2; - ламинация обложки - матовая или глянцевая; - твердый переплет - картон 2 мм, каптал, белые форзацы, прямой корешок - сверхпрочный полимерный клей; - каждая книга упакована в термопленку. Каждый заказ обрабатывается в индивидуальном порядке: каждой книге, напечатанной по технологии Print-on-Demand, присваивается уникальный номер.

Читать далее