расширенный поиск

Книга по требованию: The Western Engineer, Vol. 1

Товар № 11260832

Containing Tables, Rules, and Practical Information for the Use of the Owner, Engineer and All Interested in the Use of Steam Engines and Boilers (Classic Reprint)

Вес: 0.32 кг.
Год издания: 2015
Страниц: 194 Переплет: мягкая обложка
Товар отсутствует
Узнать о поступлении

Excerpt from The Western Engineer, Vol. 1: Containing Tables, Rules, and Practical Information for the Use of the Owner, Engineer and All Interested in the Use of Steam Engines and Boilers

The following will explain the above cut:

The ore and water being fed into the mill at the hopper A. the rotating rollers and scrapers throw the ore against the ring dye, where it is crushed to any desired fineness by the centrifugal force of the rollers as they roll over it.

The water and pulverized ore are thrown against and through the screens when fine enough. The discharge is so perfect that it makes little or no slimes, and leaves the pulp in good condition for concentration. The rollers are suspended, leaving a space of one inch between them and the bottom of the mill, thus allowing them to pass freely over the quicksilver and amalgam without grinding it or throwing it from the mill, while it agitates it sufficiently to make amalgamation perfect. For wet crushing and gold saving it has no equal.

About the Publisher

Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com

This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Эта книга будет изготовлена в соответствии с Вашим заказом по технологии Print-on-Demand компанией ООО «Книга по Требованию». Print-on-Demand - это технология печати книг по Вашему заказу на цифровом типографском оборудовании. Книга, произведенная по технологии Print-on-Demand (POD) представляет собой классическую печатную книгу с соблюдением всех стандартов качества, от офсетной бумаги и плотного картона до качественного клея, используемого при изготовлении. Черно-белая текстовая или полноцветная иллюстрированная книга (в зависимости от исходного файла, подготовленного к печати) может быть изготовлена в разных вариантах: - в мягкой обложке (Клеевое Бесшвейное Скрепление); - скрепление скобой (для книг с небольшим количеством страниц); - в твердом переплете с клееным текстовым блоком; Материалы, используемые при производстве книги: - бумага текстового блока - офсетная (белая или кремовая) 80 г/м2 - мягкая обложка - бумага мелованная 250 г/м2; - ламинация обложки - матовая или глянцевая; - твердый переплет - картон 2 мм, каптал, белые форзацы, прямой корешок - сверхпрочный полимерный клей; - каждая книга упакована в термопленку. Каждый заказ обрабатывается в индивидуальном порядке: каждой книге, напечатанной по технологии Print-on-Demand, присваивается уникальный номер.

Читать далее